www.steelwiredrawingmachine.com

Dom
Produkty
O nas
Wycieczka po fabryce
Kontrola jakości
Skontaktuj się z nami
Poprosić o wycenę
Wideo
Dom ProduktyMaszyna spawalnicza

5.0mm - 12.0mm Welding Wire Forming Machine , Ribbed Steel Wire Wire Processing Machine

5.0mm - 12.0mm Welding Wire Forming Machine , Ribbed Steel Wire Wire Processing Machine

    • 5.0mm - 12.0mm Welding Wire Forming Machine , Ribbed Steel Wire Wire Processing Machine
    • 5.0mm - 12.0mm Welding Wire Forming Machine , Ribbed Steel Wire Wire Processing Machine
  • 5.0mm - 12.0mm Welding Wire Forming Machine , Ribbed Steel Wire Wire Processing Machine

    Szczegóły Produktu:

    Place of Origin: JIANGSU CHINA
    Nazwa handlowa: Welding wire production equipment
    Orzecznictwo: ISO9001

    Zapłata:

    Minimum Order Quantity: 1500T/Y CO2 welding wire
    Cena: Negotiated
    Packaging Details: plastic bag
    Delivery Time: 60days after receiving order and deposit
    Payment Terms: T/T 30% deposit,70% rest payment before shipment
    Supply Ability: 2000pcs/month
    Skontaktuj się teraz
    Szczegółowy opis produktu
    Type: Welding Wire Machine Material: black low carbon steel wire or galvanized wire or ribbed steel wire
    Place of Origin: Jiangsu, China (Mainland) Usage: welding wire
    materials: Ø5.5MM diameter: Ø0.8、Ø1.0、Ø1.2、Ø1.6MM
    weight: 15/25Kg Positioning: Microscope

     

    5.0mm - 12.0mm galvanized wire Welding Wire Machine , ribbed steel wire Machine

     

     

     

    Machine features:

     

    Technical date of welding wire forming machine

     

    1. Max. output speed: 130m/min

     

    2. Forming diameter: 3.2-6.0mm

     

    3. Suitable strip width: 10-30mm

     

    4. Suitable strip thickness: 0.3-1.2mm

     

    The production process:

    №1 Pretreatment, rough production line

    Steel wire pretreatment(including:Pay-off stand + Disorderly parking+New type(water clean)+ Electrolytic pickling + boron coating + High frequency drying + LZ6/560 straight-line wire drawing machine + SG800 I-spool take-up machine or none stop take-up machine

    №2 Fine drawing production line

    FX800 I-spool(or rotary ) wire pay-off machine + LZ8/400(or LZ7/400)Straight line wire drawing machine + Tension stand + Wash tank + SG630I-spool wire take-up machine

     

    №3 Chemical copper plating production line

    №4 Layer and packing production line

    SG630 spool pay-off machine (active type) + middle + layer winding machine

    №5 S4525 heat shrinkable packaging machine for packaging, warehousing

     
     
     
    Wire Diameter : 5.0-12.0mm
    Max Mesh Width : 2500mm
    Max Mesh Length 6000mm
    Mesh Opening : 100*100- 300*300mm
    Mesh Form Produced : in panel
    Number of Line Wire : 24
    Welding Speed : max50-60 cross wires/min
    Power : 200KVA*12 ( transformer with water cooling system )
    Pulling Mesh Way: pulling mesh back and forward repeatedly by Servo Motor
    Rated voltage: 380V 50Hz Three Phase or according to the detailed requirements
    Motor: 11KW (electromagnetic brake motor)
    Welding Way: Resistance Welding Controlled by the Silicon
    Welding Time: 10ms~100ms
    Pressure Mode: adjustable spring pressure
    Weft Wire Feeding way: step motor falling weft wire automatically
    Material: black low carbon steel wire or galvanized wire or ribbed steel wire
    color green,blue,yellow

     

     

     

     

    Technology parameters

    Overall dimensions (L*W*H) 4500*840*1720(mm)

    Max packing dimension (W*H) 270*100(mm)

    Packing Speed 10-13 sets/min

    Max sealing length 200mm

    Conveyor horizontal hight 800+30(mm)

    Working pressure about 0.5Mpa

    Power source 50Hz/AC380Vthree phase five wire

    Power(Max) about 15kW

     

     

    5.0mm - 12.0mm Welding Wire Forming Machine , Ribbed Steel Wire Wire Processing Machine

    5.0mm - 12.0mm Welding Wire Forming Machine , Ribbed Steel Wire Wire Processing Machine

    5.0mm - 12.0mm Welding Wire Forming Machine , Ribbed Steel Wire Wire Processing Machine

     

     

    production equipment parameter

     

    1. Wire material surface pre-treatment

    1.1high shelf pay-off:Put a wire rod, without motor

    1.2 Scribble and automatic stop switch: wire out

    of the pay-off machine through the steel ring with

    a diameter of 200 mm, if a few circle wire

    entwined, steel ring that was taken to the other

    side, t the bottom of the stroke switch will send

    signals, and the entire line emergency stop.

    1.3 Repeated bending mechanical shell and

    wire ball strong scrubbing device: the wire rod

    at least six direction perpendicular(National

    initiative)Bending heat treatment to strip iron

    oxide on the surface of the wire.

    Eight peeling wheel, material: ZG45 steel, hardness of HRC50, Wheel

    inner diameter Ф 115 --- Ф 120mm.

    Wheel service life of 6000 hours. After

    peeling ,the wire through period of tapered hole, use wire clean ball strongly wipe the

    surface of wire rod, and does not damage

    the wire surface, reduce the waste into the electrolytic pickling tank, ensure the

    effect of pickling, facilitate drawing; By pressure cold water irrigation and block and

    impurities, rust on the surface of the wire rod export high-pressure gas blowing

    device, reduce by wire out of the water.

     

     

     

    Function features and advantages:


    1. This machine is controlled by the special computer, the welding current and welding time in each welding transformer can be individually adjusted. The machine operating interface is made up with color touch screen and control buttons, easy to operate.
    2. Host framework structure, stable performance, the welding pressure is continuously adjustable, solid and perfect welding spot.
    3. Integrated deceleration electromagnetic brake motors for power, inverter control, adjustable speed.
    4. Modular design for the upper and lower electrodes, convenient to adjust the mesh.
    5. The line wires are sent by labor and fed automatically, the cross wires are added and fallen automatically from the special hopper.
    6. The mesh pulling part driven by servo motor can be set a variety of cross space in the same mesh, pull the mesh continuously back and forth to extend the size of mesh, and use pneumatic clamping device to accurate cross spacing.
    7. Both the welding electrodes and transformers are equipped with water-cooling system to prolong the life and working time.

     

     

    Szczegóły kontaktu
    Jiangyin Yifa Metal Science & Technology Co., Ltd

    Osoba kontaktowa: LIU

    Wyślij zapytanie bezpośrednio do nas (0 / 3000)

    Inne produkty